#1 2009-10-11 09:36:49
[Lly] WL-500gP + 802.11n
機型: WL-500gP
mini PCI無線網卡: WL-121W R1.03
韌體: WL500W-1.9.2.7-d-r655.trx
Reading :: TFTP Server.
TFTP_BLKLEN!!
Done. 3670016 bytes read
Download of 0x380000 bytes completed
Write kernel and filesystem binary to FLASH (0xbfc40000)
flash device 'flash1.trx'
Programming...
done. 3670016 bytes written
$ wl ver
4.150 RC10.5
wl0: Apr 10 2008 11:52:33 version 4.150.10.29
$ wl status
SSID: "default"
Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 8
BSSID: 00:1D:60:xx:xx:xx Capability: ESS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
802.11N Capable:
Chanspec: 2.4GHz channel 8 40MHz (0x2d08)
Control channel: 6
802.11N Capabilities:
Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
$ wl cap
ap sta wet mac_spoof led wme pio 802.11d 802.11h rm cqa mbss4 afterburner ampdu amsdu
恢復預設值, console訊息
Restarting system.
Please stand by while rebooting the system...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ￥| 10?e 12 22:21:19 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000
Committing NVRAM...dony
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ￥| 10?e 12 22:21:19 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr xx-xx-xx-xx-xx-xx, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 4036 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.37.6 (root@localhost) (gcc version 3.4.6) #1 2009-10-04 18:23:22 MSD
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,ext3 noinitrd init=/linuxrc console=ttyS0,115200
CPU: BCM4704 rev 9 pkg 0 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 263.78 BogoMIPS
Memory: 62488k/65536k available (1752k kernel code, 3048k reserved, 236k data, 88k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
N_HDLC line discipline registered.
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
PPPoL2TP kernel driver, V0.15.1
PPTP driver version 0.8.4
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Flash Id: Vendor: 0x0001 Device: 0x007e
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 912
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x007f0000 : "linux"
0x000e4178-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
0x003e0000-0x007f0000 : "flashfs"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (5953 buckets, 11906 max) - 328 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 88k freed
Algorithmics/MIPS FPU Emulator v1.5
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.29
PCI: Enabling device 01:02.0 (0004 -> 0006)
eth1: Broadcom BCM4329 802.11 Wireless Controller 4.150.10.29
waitpid: No child processes
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entering learning state
br0: port 1(vlan0) entering learning state
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan0) entering forwarding state
br0: topology change detected, propagating
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:24:57 Oct 4 2009
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 01:03.0 (0000 -> 0001)
UHCI: Enabling VIA 6212 workarounds
usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
UHCI: Enabling VIA 6212 workarounds
usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 12, pci mem c0143000
usb.c: new USB bus registered, assigned bus number 3
EHCI: Enabling VIA 6212 workarounds
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
usb.c: registered new driver audio
audio.c: v1.0.1:USB Audio Class driver
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
PCI devices found:
Class 0501: PCI device 14e4:0800 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0c03: PCI device 14e4:4715 (rev 9).
Class 0604: PCI device 14e4:0804 (rev 9).
Class 0b30: PCI device 14e4:0816 (rev 9).
Class 0703: PCI device 14e4:4712 (rev 9).
Class 1000: PCI device 14e4:4718 (rev 9).
Class 0500: PCI device 14e4:080f (rev 9).
Class 0600: PCI device 14e4:4704 (rev 9).
Class 0280: PCI device 14e4:4329 (rev 1).
Class 0c03: PCI device 1106:3038 (rev 98).
Class 0c03: PCI device 1106:3038 (rev 98).
Class 0c03: PCI device 1106:3104 (rev 101).
echo for PaN ::: &&&PaN 離線
相關討論主題
| 主題 | 回覆 | 點閱 | 最後發表 |
|---|---|---|---|
|
|
25 | 88267 | 2020-09-02 12:14:11 作者 DoBeDo |
|
|
20 | 85193 | 2016-05-23 21:42:42 作者 lookovergirl |
|
|
57 | 207133 | 2014-01-07 23:42:40 作者 hannahmo |
|
WL-500gP V1是否可以更换网卡升级成WL-500W？谢谢！ 作者 Zippy
|
7 | 29212 | 2013-11-29 08:46:45 作者 hannahmo |
|
Asus WL-500GP 有沒有新的韌體 作者 cris
|
2 | 13452 | 2013-10-05 18:16:29 作者 savrin |
